A ridge vent is an exhaust vent installed along the peak of the roof, where the two roof slopes meet. It lets warm, moist air escape from the attic and is usually covered with shingle caps so it blends into the roofline. Ridge vents work best when paired with enough intake vents lower on the roof.
A soffit vent is an intake vent placed in the underside of the roof eave. It draws fresh outside air into the attic so it can flow upward toward the exhaust vents. Blocked soffit vents, often from insulation or debris, can limit airflow and reduce how well the whole system works.
Intake ventilation is the part of the system that lets outside air enter the attic, typically near the eaves or lower portion of the roof. It supplies the cool air that pushes warm air out through the exhaust vents. Without enough intake, even high-quality exhaust vents cannot perform properly.
Exhaust ventilation removes hot, humid air from the attic through vents at or near the top of the roof. Common options include ridge vents, box vents, gable vents, and powered fans. Exhaust and intake need to be planned together to keep air moving in a steady, effective pattern.
Net free area is the actual open space in a vent that air can pass through, after accounting for screens, louvers, and other obstructions. It is usually measured in square inches and used to compare vent products fairly. Contractors use NFA to calculate how many vents your attic needs.
Balanced ventilation means the attic has an appropriate ratio of intake to exhaust airflow, so air enters and exits at similar rates. This steady flow helps manage heat and moisture throughout the attic space. An unbalanced setup, with too much of one type of vent, can create dead zones and poor airflow.
Baffles are lightweight channels installed between the roof rafters at the eaves to keep insulation from covering the soffit vents. They preserve a clear path for incoming air to move from the soffits into the attic. Installing baffles is a common step when adding or improving attic ventilation.
Attic condensation forms when warm, moist air meets cooler surfaces such as the underside of the roof deck. Over time, it can lead to damp insulation, mold growth, and wood deterioration. Proper ventilation helps carry moisture out of the attic before it can build up.